Kahn Atom Climate Control System
Introducing the Kahn Atom, a climate control system that will keep sealed (closed loop) and non-sealed indoor grow rooms at the perfect day and night temperatures 24 hours a day, 7 days a week, whatever the weather is outside to ensure plants stay healthy with increased yields all year round.
The Kahn Atom is used to not only cool but also heat standard sized grow rooms that are running up to, or equivalent to, 12-14 600w grow lights. And with using inverter technology, once the target temperature is reached, the energy consumption decreases while it maintains the perfect environment. And you don’t need to worry too much about noise as it’s quiet running when operating, the only sound is that of air passing through the system.
The set up comes with two units, the ‘outside’ condenser which controls the heating and cooling, while the ‘inside’ air handler circulates the air around the grow room. The system is supplied with 3 meter flexible hoses that are pre-charged with azeotropic refrigerant and sealed. This means no air conditioning engineer, or specialist tools, are required to fit the system, just some very basic DIY skills and with the air handler being extremely light, one person can fit it on their own.
A big advantage of the Kahn Atom is that it will run off a single 3 pin standard UK plug so no specialist 3 phase power supplies are required. This makes the unit Plug & Play as once its set up, hoses attached, plugged in to the mains supply and target temperatures set, it's good to go.
Key features of the Kahn Atom climate control system includes:
- Maintains target lights on/lights off temperatures
- For up to, or equivalent to 12-14 600w HID grow lamps
- Automatically switches between lights on and lights off temperatures
- Simple to use control unit
- Supplied with 3m sealed hoses pre-charged with azeotropic refrigerant
- Easy to install - no specialist tools or engineer required
- Does not need water or additional plumbing
- Quiet running with no vibrations
- Helps reduce the risk of moulds, pathogens and fungi
The outdoor condenser DOES NOT need to be placed outside, but does need to be located away from the grow space, usually in a different room of the house or building. It's also recommended that it's placed in a small grow tent, like the BAY6 Propagation Tent, and an extraction fan, like the Kaizen In-Line Fan, is then attached to the tent using ducting allowing fresh air to circulate around the outdoor unit at all times.
If you have any questions about the Kahn Atom Climate Control System, do not hesitate to call us for free on 0800 038 7100.
Watch the video below to see a typical set up:
Got a question to ask?
Use this form to submit your question.
Question will be displayed after moderation.